 |
MX-1 Ultrasonic Thickness Gauge
The MX-1 handheld corrosion thickness gauge is a fixed velocity gauge making it an affordable precision tool that requires no special training to operate.
The MX-1 ultrasonic thickness gauge will hold a single, user programmable velocity. Pre-calibrated to steel, for immediate inspection, the MX-1 is the ideal model where one material is being tested day after day.
While the gauge is supplied ready to measure steel the velocity can be quickly changed using the simple software program which is supplied with each unit, allowing other materials to be measured.
- Ready to use, straight from the box
- Ideal for basic thickness measurements
- Durable gauge and probe construction
- Large backlight LED display
- Tough, impact, water, dust & petroleum product resistant
- Up to 200 hours battery life
|
 |
MX-2 Ultrasonic Thickness Gauge
The MX-2 handheld corrosion thickness gauge is a fixedd velocity gauge making it an affordable precision tool that requires no special training to operate.
The MX-2 ultrasonic thickness gauge has two user programmable velocities and 8 pre-programmed velocities to measure th thickness of aluminum, steel, stainless steel, cast iron, plexiglass, PVC, polystyrene and polyurethane-making the MX-2 and ideal model for the person who tests a few different materials regularly.
This small, lightweight, water resistant unit is easy to use and designed for the harshest enviroment.
- Ready to use, straight from the box
- Ideal for basic thickness measurements
- Durable gauge and probe construction
- Large backlight LED display
- Tough, impact, water, dust & petroleum product resistant
- Up to 200 hours battery life
|
 |
MX-3 Ultrasonic Thickness Gauge
The MX-3 corrosion thickness gauge is an easy to use, versatile gauge, quickly calibrated on site by the user to give reliable, accurate thickness measurements on a wide variety of material substrates.
Taking 16 readings per second the high speed scan mode allows the user to quickly scan an area of material for defects or to identify its thinnest point, ideal for pipelines or large test surfaces.
- Multi calibration options: 1 point, 2 point and speed of sound for optimal accuracy
- High speed scan mode: 16 readings per second
- Wide range of interchangeable transducers
- Easy to use menu structure
- Tough, impact, water, dust & petroleum product resistant
- Up to 200 hours battery life
|
 |
MMX-6 Ultrasonic Thickness Gauge
Ideal for the NDT inspection of pipes, storage tanks and other metal structures, the MMX-6 ultrasonic thickness gauge features both Pulse-Echo (PE) and Echo-Echo mode (EE) ThruPaint™ technology.
The MMX-6 range of handheld ultrasonic gauges are designed to ignore the coating thickness giving a true material thickness value.
Designed to ignore applied coatings up to 2mm (80mils) thick on metal substrates, the CG60 is ideal for identifying internal corrosion that isn’t visible due to the applied coating.
The MMX-6 corrosion thickness gauge also offers high speed scanning, taking 16 readings per second, making quick scanned passes over the test material. With the lowest thickness value held in memory and displayed when the scanning is complete.
Once a user defined nominal thickness value is set the differential mode will display the +/- thickness difference from the nominal value entered.
The built-in minimal thickness alarm mode illuminates a red LED and an audible alarm sounds when a measurement falls below the user defined target value.
- Range of display & measurement options: Pulse-Echo, Echo-Echo ThruPaint™ technology
- Adjustable gain: -30dB to 70dB range
- Multiple calibration and material selection options
- High speed scan mode: 16 readings per second
- Differential and minimal thickness alarm modes
|
 |
MMX-7 Ultrasonic Thickness Gauge
The MMX-7 series of handheld ultrasonic corrosion thickness gauges has a large, easy to read display providing users with A and B-Scan options for accurate interpretation of measurements.
Both MMX-7 coating thickness gauges offer a 2D cross sectional block view providing a graphical representation of a material's thickness, ideal for accurate analysis and identification of pits and corroded areas.
Taking 32 readings per second in scan mode, the internal data logger stores up to 12,000 readings together with their waveforms. RS232 output to the Elcometer NDT data management software allows ease of analysis and professional reporting.
The MMX-7 series of handheld ultrasonic gauges has 64 user definable setups and works with a wide range of transducers which can be selected from the gauges internal menu.
The gain control function in Echo-Echo mode automatically adjusts the amplitude of the received echo, but it can be overridden using the selectable low, medium and high gain options to suit the properties of the material being measured, ideal for difficult applications.
- Range of display & measurement options: Pulse-Echo, Echo-Echo ThruPaint™ technology
- Multiple calibration and material selection options
- Adjustable gain: -30dB to 70dB range
- Automatic gain control (AGC)
- 64 User definable setups
- High speed scan: 32 readings per second
- Differential and minimal thickness alarm modes
- Data output and storage: 12,000 readings and waveforms or B-Scans
- Data management software
|