Calgary, Alberta
Tel: (403) 774-1238
Fax: 1-866-611-3540		  
MET-U1A



The ultrasonicportable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Unlike the standard Dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "Ultrasonic UCI" technology, which enables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device. Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part.
The Phase II MET series of portable hardness testers offers a model that include a dynamic probe for easy, quick hardness testing of parts with a mass greater than 5kg.
 
Model No.
Data

MET-U1
(w/Ultrasonic Device)
Probe Type

UCI 10N
Utilizes Vickers style Diamond
Indentor
Tolerance +/- 3.0% of average from the reference value of the test block with a minimum of 5 tests
Measuring Range:

HRC: 20-67
HRB: 59-99
HB: 75-650
HV: 75-1000
Applicable Test Materials Steel & cast steel, alloy tool steel, stainless steel, grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy.
Minimum Thickness .040" (Steel)
Battery Type NiMH (C)
Operating Temperature 5-104 ° F
Dimensions (Gauge only) 145 x 80 x 40mm
Weight (Gauge only): 8.5oz

AlphaDUR II

-Measurements can be taken anywhere, in the shop or field.  Piece parts or installed components,
-Measure in any position
-Measurements are not effected by material thickness like "rebound/dynamic" testers making it ideal for testing pipe and tanks
-Measuremtns are instantaneous and displayed digitally on a large easy to red LCD display diretly in HB, HRC, HRB, HV or Tensile Strength
-The small indentor allows access to gear teeth, s;ines and other areas difficult to testwith other types of hardness testers
-Repeatable measurements are assured by the displayed average of measurements that are sampled at 500 measurements per second
-Easy to use, operation is menu driven and the large backlight graphic display