Parker PL-10 Series

Parker Portable coils NDT

Parker PL-8 Series

Parker PL-8 Series

Parker Research Corporation portable magnetizing coils are designed for magnetic particle inspection of ferrous metal parts. The new coils allow for the use of either dry powder or wet fluorescent inspection media and may be used for demagnetizing as well.

The coils are molded in a tough black polyurethane material and come equipped with a foot switch and 10′ yellow neoprene power cord. The sealed electrical connection box has a 2″ × 4.5″ flat base allowing the coil to stand in a vertical position.

The coils are designed for a 50% duty cycle, and are equipped with thermal overload protection. Both the PL-10 and the PL-8 operate from a standard 115 VAC, 60 Hz power source. The PL10S and PL8S operate from a 230VAC, 50-60 Hz power source.

Pulsed DC Versions

Models Pl-10PDC and PL-8PDC operate from a standard 115 Va input, but produce a powerful pulsed DC magnetic field.

PL-8 SPECIFICATIONS

To see the data table, please view this page on a larger screen.

Model

PL-8 PL-8S PL-8PDC
Inside dia. 8″ 8″ 8″
Outside dia. 11½” 11½” 11½”
Width 2¼” 2¼” 2¼”
Line Voltage (50-60Hz) 115 VAC 230 VAC 115 VAC
Line Current (air) 11 A 7 A 4 A
Amp-turns (air) 3,300 3,640 2,080
Weight total 9 7/16 lb 9 7/16 lb 8 7/16 lb
Plastic carrying case Molded plastic with foam insert
23″ × 16″ × 7″

Parker PL-10 Series

Parker PL-10 Series

PL-10 SPECIFICATIONS

 

To see the data table, please view this page on a larger screen.

Model

PL-10 PL-10S PL-10PDC
Inside dia. 9 7/8″ 9 7/8″ 9 7/8″
Outside dia. 14 1/2″ 14 1/2″ 14 1/2″
Width 2 1/2″ 2 1/2″ 2 1/2″
Line Voltage (50-60Hz) 115 VAC 230 VAC 115 VAC
Line Current (air) 12.3 A 8.25 A 5 A
Amp-turns (air) 3,075 3,506 2,125
Weight total 14 7/8 lb 14 7/8 lb 13 7/8 lb
Plastic carrying case Molded plastic with foam insert
23″ × 16″ × 7″