UT Transducers

Single Element Contact UT Transducers (SLM)- High Wear

SLM

Hi wear contact transducer with extended stainless steel ring, used on rough surfaces, castings, billets and extruded parts.  Medium Damping, comes with either BNC or Lemo Connectors, specify at time of order.

Element Size

1.0 MHz

2.25 MHz

3.5 MHz

5.0 MHz

.500” DIA. PSLM501 SLM5025 PSLM5035 SLM5050
.750” DIA. PSLM751 SLM7525 PSLM7535 SLM7550
1.00” DIA. PSLM101 SLM1025 PSLM1035 SLM1050

 

Single Element Contact Transducers (SLF)-Membrane

SLF

 

 

 

 

 

Replaceable membrane protected contact transducer, rough surfaces, castings (provides better contact). High Damped, comes with either BNC or LEMO

Element Size

1.0 MHz

2.25 MHz

3.5 MHz

5.0 MHz

.500” DIA. PSLH501 SLH5025 PSLH5035 SLH5050
.750” DIA. PSLH751 SLH7525 PSLH7535 SLH7550
1.00” DIA. PSLH101 SLH1025 PSLH1035 SLH1050

Single Element Contact Transducers (FC)-Finger Tip

Single Element

 

 

 

 

 

General contact styl transducer with stainless steel construction.  Good for near surface resolution with a 70% bandwidth, used on common metal & plastics.

Element Size

1.0 MHz

2.25 MHz

3.5 MHz

5.0 MHz

10.0 MHz

.250” DIA. PFC251 FC2525 PFC2535 FC2550 FC2510
.375” DIA.   FC3725 PFC3735 FC3750 FC3710
.500” DIA. PFC501 FC5025 PFC5035 FC5050 FC5010
750” DIA.   FC7525 PFC7535 FC7550  

Single Element Contact Transducers (FCSL)-Finger Tip (Slim Line)

Singe Element Slim Line

High frequency general contact transducers with a stainless steel housing, used on common metals & plastics, High Damped.

Element Size 5.0 MHz 10.0 MHz 15.0 MHz 20.0 MHz
.125” DIA. FCSL1250 FCSL1210 FCSL1215 FCSL1220

Standard Shear Wave Transducer (SS)

Standard Shear WaveStandard Shear Wae Diagram

Shear wave transducer designed to use a variety of angle beam wedges for general weld inspection & AWS, and constructed in a low noise plastic or stainless steel housing.

Element Size(Dia.)

A

B

C

D

.500” x .500” .650” .750” 1.125” .810”
500” x 1.00” .650” .750” 1.625” 1.312”
.625” x .625” .650” .850” 1.350” 1.000”
.750” x .625” .650” .850” 1.350” 1.000”
.750” x .750” .650” .910” 1.350” 1.000”

 

Element Size

1.0 MHz

2.25 MHz

5.0 MHz

.500” x .500” PSS50501 SS50502 SS50505
.500” x 1.00” PSS50101 SS50102 SS50105
.625” x .625” PSS62621 SS62622 SS62625
.625” x .750” PSS62751 SS62752 SS62755
.750” x .750” PSS75751 SS75752 SS75755

Standard Wedges (SW)

Standare Wedge

Element Size

45

60

70

.500” x .500” SW5045 SW5060 SW5070
500” x 1.00” SW5145 SW5160 SW5170
.625” x .625” SW6245 SW6260 SW6270

Serrated (AWS Type) Square Wedges (SQW)

Serrated AWS Wedge

Element Size

45

60

70

.625” x .625” SQW6245 SQW6260 SQW6270
.625” x .750” SQW6245 SQW6260 SQW6270

SNAIL (AWS Type) Wedge (SNW)

Snail Wedge

Element Size

45

60

70

Element Size 0.625″ x 0.625″ SNW6245 SNW6260 SNW6270

 Quick Change Shear Wave Transducers (QC)

QC Transducers

Threaded shear wave transducers for quick interchanging between wedges.  Ideal for limited access and curved surfaces used for general weld inspection.

Standard

Element Size 1.0 MHz 2.25MHz 3.5MHz 5.0MHz 10MHz
0.250″ QC2525 QC2550 QC2510
0.375″ QC3725 QC3750 QC3710
0.500″ QC5025 QC5050 QC5010

Composite

Element Size 1.0 MHz 2.25MHz 3.5MHz 5.0MHz 10MHz
0.250″ PQC251 PQC2525 PQC2550 PQC2510
0.375″ PQC371 PQC3725 PQC3750
0.500″ PQC501 PQC5025 PQC5035 PQC5050

Standard Quick Change Wedges (QW)

QC Wedges

Element Size 45 Degree 60 Degree 70 Degree
0.250″ QW2545 QW2560 QW2570
0.375″ QW3745 QW3760 QW3770
0.500″ QW5045 QW5060 QW5070

Quick Change AWS Prove Up Shear Wave Transducer (QCA)

QCA Transducers

Removable shear wave transducers for quickly interchanging between wedges.  Ideal for limited access, curved, and AWS prove up

Element Size 1.0 MHz 2.25MHz 5.0MHz
0.625″ x 0.625″ PQCA62621 QCA62622 QCA62625

Quick Change AWS Prove Up Wedges (QAW)

Element Size 45 Degree 60 Degree 70 Degree
0.625″ x 0.625″ SNW6245 SNW6260 SNW6270

 

Dual Shear wave Transducers (CDA)

CDA Transducers

Designed for thin material and weld inspections that require near surface resolution.  Will Detect IGSCC (Inter Granular Stress Cracking).

Element Size 1.0 MHz 2.25MHz 5.0MHz
.250” x .250” PCDA251 CDA2525 CDA2550
.250” x .375” PCDA25371 CDA253725 CDA253750
.375” x .375” PCDA371 CDA3725 CDA3750
.500” x .500” PCDA501 CDA5025 CDA5050

CDA Angle Options-NOT INTERCHANGEABLE

Element Size 45 Degree 60 Degree 70 Degree

Miniature Angle Beam Potted (MAP)

MAP Transducers

Mini angle beam transducers with a fixed angle, stainless steel housing, all angles are in steel, aluminum angles available.

2.25MHz MAP Transducers

  45 Degree 60 Degree 70 Degree
0.187″ MAP182545 MAP182560 MAP182570
0.250″ MAP252545 MAP252560 MAP252570
0.375″ MAP372545 MAP372560 MAP372570

5.0MHz MAP Transducers

  45 Degree 60 Degree 70 Degree
0.187″ MAP185045 MAP185060 MAP185070
0.250″ MAP255045 MAP255060 MAP255070
0.375″ MAP375045 MAP375060 MAP375070

10MHz MAP Transducers

  45 Degree 60 Degree 70 Degree
0.187″ MAP181045 MAP181060 MAP181070
0.250″ MAP251045 MAP251060 MAP251070
0.375″ MAP371045 MAP371060 MAP371070

Mini Miniature Angle Beam Potted (MMAP)-DIM, 0.375″L x 0.250″W X 0.37″H

MiniMAP Transducer

 

Mini miniature angle beam potted transducers with a fixed angle, are designed with stainless steel housing for durability.  Standard angles are in steel, all other non standard angles with specified materials can be produced.

5.0MHz MMAP Transducers

  45 Degree 60 Degree 70 Degree
0.187″ MMAP185045 MMAP185060 MMAP185070

10MHz MMAP Transducers

  45 Degree 60 Degree 70 Degree
0.187″ MMAP181045 MMAP181060 MMAP181070

 

Single Element Delay Line Transducers

DelayLinePrb

Diameter MHz Part Number Connector Entry
1/4” 15 T-402-5507 Microdot Side
1/4” 20 T-402-6507 Microdot Side

Single Element Delay Line Pencil Transducers-Pit Probe

PencilProbe

Diameter MHz Part Number Comments Entry
3/16” 10 T-481-4507 1/16” Tip Top
3/16” 10 T-681-4507 90° Right Angle Side
3/16” 15 T-581-5507 1/16” Tip Side

 6″ Extension Wands

 DelayLine Ectension wand