Dakota Ultrasonics MX-5

Discontinued Replaced with ZX-5

Dakota Ultrasonics MX-5 is a simple to use hand-held Ultrasonic Thickness Gauge. It offers features that make your job easier. An Alarm mode, Differential mode, and high-speed scanning are the main features of the Dakota Ultrasonics MX-5. The Dakota Ultrasonics MX-5 comes as a complete kit, ready to use, and is backed by Dakota Ultrasonics 5 year limited warranty.

Applications for us:

  • Corrosion & Pitting
  • Boilers
  • Tube & Pipe
  • Tanks
  • Glass

Measuring:

Range: Measures from 0.025″ to 19.999″ (0.63mm to 500 mm)

English or Metric units

Resolution:0.001″ (0.01mm)

Four reading per second for single point measurements or 16 per second in SCAN mode

1 or 2 point calibration

Features: differential Mode; enter acceptable thickness value, the unit will display +/- the difference from the value entered

Alarm Mode: Enter the minimum acceptable thickness value, if the measurement falls below the minimum, red led wid will illuminate and sound beeper.  If the measurement is above the minimum value, green led will illuminate

Physical:

Weight: 10 ounces

Size: 2.5 W x 4.75 H x 1.25 D inches | 63.5W x 120.7 H x 31.8D mm

Operating Temperature: -20 to 120F (-20 to 50C)

Case: Extruded aluminum body/nickel plated aluminum end caps, resistant to impact and environmentally sealed

Transducer:

Dual element (transmit and receive)

1 to 10 MHz Frequency ranges available

Locking quick disconnect Lemo connectors

4 foot Cable (potted on removable)

Power Source

Two 1.5V Alkaline

Typically operates for 200 hours on alkaline

Warranty

5 year limited